Repair costs
Control Board or Touch Panel: Price Band
The band most often quoted on a guess, and the three readings that come before it.
Viking Repair Service Los Angeleson site 8am to 8pm, every day of the weekcalls picked up 24/7
The figures on this page
Usual range for this repair
$430$670
Agreed with you in exact figures before anything is opened, ordered or fitted.
- Service call
- $89, and it comes off the repair once you approve it
- Control board or touch panel
- $430$670
What sits behind each line
- The sensor first
- A sensor that has drifted makes a board look as if it is lying. Reading it takes minutes and rules out the dearest line here.
- Then the plug and the harness
- Connectors work loose and pins corrode in a damp corner. A signal that comes and goes when the loom is moved is not a board fault.
- Then the board or the touch panel
- If the inputs are sound and the outputs are not, the board is the answer. That is when this band applies, and not before.
- Ordering against the serial number
- Control parts are matched to the cabinet, so one is ordered on your serial number and fitted on a return trip with no further call-out.
The rail above is the board band, and the table under it lists what gets read before anybody reaches for it. Row one is the cheap outcome, and it is commoner than the board. Viking Repair Service Los Angeles works down that order on every call, and you are welcome to ask why on (213) 799-7879.
Why the board is blamed so often
Rows one and two are the reason this page leads with the cheap outcomes. A control sits between what the cabinet measures and what the cabinet does, so a wrong reading arriving at a healthy board produces exactly the behavior of a faulty one. Sensors drift with age and connectors loosen in a warm, damp corner, and both are quick to check with a meter. Skip that and you have bought the dearest part on the list to fix a fault that was upstream of it.
What the band buys once the board is proved
Rows three and four are the repair itself. The part is specific to the cabinet, so it is ordered against your serial number rather than pulled off a shelf, and fitting it means setting the control up again and watching each compartment answer. The second trip belongs to the same fault and carries no second call-out.
What the figure covers, and what it does not
Inside the figure
- The readings that rule the cheaper faults in or out.
- The replacement control or panel, matched to your cabinet.
- Setting it up and confirming every compartment answers again.
- The return trip to fit an ordered part, with nothing more to pay for the visit.
Not inside it
- A sensor or a harness found faulty instead, which is a smaller job and a smaller figure.
- House wiring or the outlet behind the cabinet, which belongs to an electrician.
- A second fault the board was masking, quoted on its own once it is visible.
How the quote itself should behave
-
Normal
A sensor ruled out with a meter before the board is condemned.
Not normal
A board named from the symptom alone.
Time to call
Ask what reading proved it.
-
Normal
The board band, ordered against your model and serial number.
Not normal
A board figure given before those numbers were read.
Time to call
The number decides the part and the price.
-
Normal
A return visit to fit a board that had to be ordered.
Not normal
A charge for that visit that was never mentioned on the first.
Time to call
Ask what the fitting visit comes to.
That is the order a board quote is built in, and the order it should be explained to you. Call Viking Repair Service Los Angeles at (213) 799-7879 and ask what reading condemned the board.
Asked about this figure
- Somebody has already told me it needs a new board. Is that likely?
- Sometimes, and it is the easiest thing to say from a doorway. A board controls everything, so every symptom points at it while nothing rules it in. What rules it in is a sensor reading correctly, a connector holding under movement, and the board still failing to act on what it is being told.